C90 CHRISTMAS SNOW COLLECTION

OTP – Book

By Lisa-Marie Watling

Materials:

Fabscraps C90 001 Snow Family

Fabscraps C90 003 Santa’s Helpers

Fabscraps C90 005 Stockings & Bells

Fabscraps C90 006 Snow Stockings

Fabscraps C90 007 Dear Santa

Fabscraps C90 008 Santa’s Wreath

Fabscraps DC90 002 The Night Before Christmas chippie

Fabscraps MC90 001A Carders Pack

Fabscraps DC90 011 Holly chippie

Fabscraps DS059 Stencil

Wooden ‘book’

Inks – brown and green

Gold and red embossing powder

Craft cardstock

Gold crackle paste

Cotton pads

Glitter glue – red, brown, green and yellow

Red felt & plastic flowers

Resin leaves

Metal trinket

Gold & white craft paint

Heavy white gesso

Tombow

Foam dots

Glue Gun

Glossy Accents

Directions

·                Paint your box with gold craft paint

·                Apply gold embossing powder to your title chippie DC90 002 and heat emboss

·                Cover your Holly chippie DC90 011 with green ink.  Apply some red embossing powder to the holly berries and heat emboss.  Swipe a few stripes of white acrylic paint to highlight the leaves.  Once dry, apply glossy accents and set aside to dry. Then cut from frame

·                From C90 001, cut a green strip that reads ‘Happy Holidays’ and ‘Merry Christmas’ and use this as the spine of your book.  Adhere with Tombow

·                Cover the front and the back of your book with C90 005 (red side up).  Adhere with Tombow and sand off any protruding edges

·                Adhere your title chippie to the upper portion of your book.  Fussy cut some holly leaves from C90 005; and then create a flower and leaf cluster below your title, using the flowers, leaves, metal trinket(s) and the fussy cut holly leaves.  Swipe with a little heavy white gesso

·                Cover the inner left hand side page of your book with C90 008 (checkered side up). Sand off any protruding edges and then ink all around with brown.  Using your DS059 stencil, stencil some of the design onto this page with green ink and your blending tool; use a coloured pencil to ‘shade’ your leaves.  Then apply some gold crackle paste through the swirls of the stencil around the green inked portion.  Once dry, adhere your DC90 011 holly chippie over the stencilled design you’ve created

·                Fussy cut the Santa from C90 003, adhere to some craft cardstock and fussy cut around him again.  Create an ‘L-shaped’ stand, as he is going to be in the foreground of the inner part of your book.  Fussy cut some Christmas trees from C90 007 and a snowman family from a sheet from your Carders Pack and chalk the edges with brown

·                Cut a piece of C90 006 down to measure the inner portion of the box part of your book. Adhere with Tombow and dry brush some white craft paint across the central part

·                Arrange and adhere your fussy cut trees and snowman family to this; use both Tombow and foam dots to create a 3D effect

·                Adhere your fussy cut Santa to the bottom framed part of your book so that he stands in the forground

·                Pull your cotton pads apart and cut them to resemble snow (icicles for the upper frame of your box and mounds for the lower part).  Adhere these accordingly (as shown in the photographs) with Tombow.  Arrange and adhere some more pieces of cotton pads around and behind your Santa so that it appears that he is walking in snow

·                Fussy cut some of the snowflakes from a sheet from your Carders Pack and arrange and adhere these to the upper section of ‘icicle’ snow

·                Finish off the characters and trees in this section with glitter glue

C90 CHRISTMAS SNOW COLLECTION

Wall Hanging

by Kavitha

Supplies list:

FabScraps Christmas Snow Collection  -C90-002,004,005

C90 stickers- ST89-001

Wooden base white gesso, Mod podge, Snow paste, glitters, acrylic paint

FabScraps chipboard - DC90-003

Instructions:

1.Adhere the pattern paper 002 to the wooden base using modpodge.

2.Add some layers of pattern paper to the base

3.Give a coat of water downed white gesso to tone down the colors

4.Paint the chipboard piece with red acrylic paint

5.Glue the chipboard piece in the center,stick down the sticker to a piece of white card stock and 

   fussy cut it and arrange them to the base.

6.Add snow paste randomly and sprinkle some white glitter when its still wet

  

C90 CHRISTMAS SNOW COLLECTION

Tags

by Kavitha

Supplies list:

Fab  scraps Christmas snow  collection-C90-004

C90 stickers- ST89-001

Fabscraps chipboard-DC90-008

Card stock, flowers, die cuts shapes, twine, ribbon etc

Instructions:

1.Cut the red card stock measuring 3 by 6 inches and patter paper measuring 2 7/8 by 5 ½ inches and    adhere together

2.Cut a circle tag shape in red cardstock,plain circle shapes in white card stock and glue it together.

3.Add the sticker to the tag shape for the focal point.

4.Arrange the flowers,die cut shapes and embellishments as desired

5.Add the chipboard shape to the tag.

6.Finish it off with ribbon and twine.

C90 CHRISTMAS SNOW COLLECTION 

Star shaped cards

by Kavitha

Supplies list:

Fabscraps Christmas snow  collection - C90 - 004,008,006,005

C90 stickers- ST90-001

Cardstock, silhouette machine,mulberry flowers,die cuts,twine,white gesso

Instructions:

1.Cut the star shape card  base with silhouette machine

2.Cut three more layers of stars in pattern papers for layering.

3.Cut a circle shape with white cardstock and adhere the sticker for the focal point

4.Arrange flowers, embellishments and die cuts leaves as desired.

5.With a dry brush add white gesso randomly over the arrangement and edge of the card fora shabby look

C90 Christmas Snow Collection

Layout 

by Kavitha

Supplies list:

Fabscraps Christmas Snow Collection - C90 - 008,004,007,005,006

Fabscraps chipboard - DC90-011

Instructions:

1.Keeping C90-008 as base create some layer with other pattern papers.

2.Fussy cut the tree image from 007 paper

3.Glue down all the layers

4.Paint the chipboard with red acrylic paint.

5.Add the photo to finish off the layout.

C89 Sweet Baby Collection

Shaped Baby Album using

by Kavitha

Supplies list:

Fab  scraps sweet baby  collection card makers pack

C86 collection stickers- ST89-002

Binding rings,card stock,buttons,Silhouette cutting machine,twine,distress ink-walnut stain

Fabscraps chipboard-DC89 010,oo4

Instructions:

1.Cut the shape of the album with silhouette machine in both card stock and pattern paper

2.Glue the pattern papers on both the side of the card stock.

3.Distress the edges with distress ink-walnut stain

4.Add photo mats measuring 2 by 3 and 3 by 4 inches in card stock.

5.Decorate  the pages with die cuts and stickers

6.Add binding rings through the holes

7.Decorate the cover page with die cut,stickers,buttons,twines etc

C89 Sweet Baby Collection

Tag

by Kavitha

Supplies list:

Fab  scraps sweet baby  collection-C89-007

Card makers pack- MC89 001A, Stickers- ST89-002

Buttons, twine, die cuts and ribbon

Instructions:

1.Cut blue card stock in 3 by 6 inches and pattern paper slightly smaller, glue it down together for the base.

2.Die cut star shape in blue cardstock and circle in white card stock ,glue both together.

3.Glue  the die cut elements from the card makers pack on the die cut circle, add them to the tag.

4.Add stickers and buttons.

Tie some ribbon and twine to finish it off

C89 Sweet Baby Collection

Layout

by Kavitha

Supplies list:

Fab  scraps sweet baby  collection - C89 - 002, 004, 006, 007

C86 collection stencils- DS057

Texture paste, glitters, die cut stars, buttons,  embossing powder, embossing ink

Fabscraps chipboard - DC89 010, 004

Instructions:

1. Apply texture paste through stencils and sprinkle pink glitters before it dries.

2. Cut papers and cardstock  in different sizes-6 by 6,3 by 4 ,4 by 6 inches etc to create        

    the layers.

3.  Add die cut stars in between layers

4.  Add a piece of chipboard at the back of the photo and glue it down for dimension.

5.  Heat Emboss the chipboard with white embossing powder

6.  Add some buttons to finish off the layout.

C89 Sweet Baby Collection 

Card

by Kavitha

Supplies list:

Fabscraps sweet baby  collection-C89-007,008
Die cuts, flowers, buttons, printed labels.

Instructions:

1.Take white card stock measuring 4 ½ by 11 ½ inches and score at 5 ¾ inches for the card base

2.Cut pattern paper measuring 4 3/8 by 5 5/8 inches and glue it down to the card base

3.Take grey card stock measuring 2 ½ by 5 inches and pattern paper measuring 2 3/8 by 4 7/8 inches and glue together

4.Add die cut doilies,stars and leaves and glue down the baby image in center as focal image

5.Add some flowers and buttons to finish it off.

C89 Sweet Baby Collection 

Card

by Kavitha

Supplies list:

Fabscraps sweet baby  collection-C89-007,008
Die cuts, flowers, buttons, printed labels.

Instructions:

1.Take white card stock measuring 4 ½ by 11 ½ inches and score at 5 ¾ inches for the card base

2.Cut pattern paper measuring 4 3/8 by 5 5/8 inches and glue it down to the card base

3.Take grey card stock measuring 2 ½ by 5 inches and pattern paper measuring 2 3/8 by 4 7/8 inches and glue together

4.Add die cut doilies,stars and leaves and glue down the baby image in center as focal image

5.Add some flowers and buttons to finish it off.

C90 Christmas Snow Collection

Video by Ada Nicholls 

Click on the link below to view this gorgeous video made by Ada displaying projects done with our Christmas Snow Collection

https://animoto.com/play/0MNxdajm28uCjqOwvVfDJQ?autostart=1

FLORAL DREAMS COLLECTION

Lantern

-Tanya Cloete-

For This Project You Will Need:

·         FabScraps Floral Dreams Collection paper range : C88 005, 006 & 007

·         FabScraps Chipboard Piece : DC 88 009

·         Silhouette Cameo

·         Wooden Canvas Block

·         Circle Chipboard Frame

·         Tea Light (Battery Operated)

·         Creative Expression Dies Grand & Petite Vinery

·         Turquoise & Green Cardstock

·         White Acrylic Paint

·         White Gesso

·         Ranger Embossing Powder Bridal Tinsel

·         Lindy’s Stamp Gang Embossing Powder Merci Beaucaup Mint

·         Metal Embellishments (Butterfly, Fairy Wings, Filigree), Bird, Flowers, White Flat Back Pearls, Lace, Grass String , Rope & Trims

Instructions:

1.      Silhouette Cameo:

·         Cut a large 3D lantern from turquoise and green cardstock and the contrasting accents from sheet 005 and 007 as per the picture. Remember to cut out a space as per the picture for the front section of the lantern.

·         Cut a piece from sheet 006 to fit the back of the lantern on the inside. Adhere.

·         Cut two small bows from sheet 007.

·         Cut 3 flowers from sheets 005 & 007 to make paper roses.  Remember to cut 3 of each of the same size.  Mine are various sizes so you can choose how big or small you want yours to be.  Assemble the paper roses…you can follow this link on how to make the paper roses https://www.youtube.com/watch?v=skuSJcYNC3E. Paint the roses randomly with white paint.

2.      Paint the wooden canvas block with white paint and cut sheet 007 to fit.

3.      Wrap grass string around the circle chipboard frame and adhere to the wooden canvas block. Adhere this to the bottom piece of the lantern.

4.      Make holes on the top pieces assemble completely.

5.      Add the rope as per the picture. This is to be used as the handle.

6.      Emboss chipboard piece 009 with Merci Beaucaup mint (fairy only) and the wings and butterfly with bridal tinsel.

7.      Adhere the fairy to the battery operated tea light and place inside the lantern on the block. This can be removed in/out to switch the tea light on/off.

8.      Cut 2 leaves using the grand vinery die from green cardstock and the petite vinery die from sheet 007. Randomly paint with white paint.

9.      Paint the metal embellishments with white gesso and leave to dry.

10.  Fussy cut some flowers, clock and the fairy from sheet 006 and paint the edges with white paint.

11.  Arrange all the pieces and embellishments as you like or as per the picture and glue!

12.  All Done!

FLORAL DREAMS COLLECTION

Fairy Garden – Dreams & Wishes

-Tanya Cloete-

For This Project You Will Need:

·         FabScraps Floral Dreams Collection paper range : C88 001, 002 & 003

·         FabScraps Chipboard Piece : DC88 006

·         FabScraps Stickers ST88 001

·         FabScraps Fabric Classic Black C46 06B

·         Silhouette Cameo

·         Cuttlebug Embossing Folder Swiss Dots

·         Wooden Canvas Blocks x2 (Big & Small)

·         Green, Maroon & Brown Cardstock

·         Grunge Board

·         Green, White, Brown & Rose Acrylic Paint

·         Glossy Accents

·         Tim Holtz Distress Ink Ground Espresso

·         Metal Embellishments, Chain, Eyelets, Flowers, Leaves, Moss, White Picket Fence, Sea Sand, Basket, Mushrooms, Broom, Gold String, Ribbon & Trims

Instructions:

1.      Silhouette Cameo:

·         Cut a bird house from sheet 002 & 003, ink the edges with ground espresso. Cut the door, roof and windows from green & maroon cardstock. Emboss the roof with swiss dots and assemble as per the picture.

·         Cut a 3D tree from brown cardstock and assemble.

·         Cut a small 3D mail box from green cardstock and the contrasting accent from sheet 003. Ink the edges with ground espresso.

·         Cut a fairy rock path from brown cardstock. Add sea sand with glossy accents to the ‘pebbles’ and leave to dry.

2.      Fussy cut the fairies from sheet 001 & 003 as per the picture. Ink the edges with ground espresso.

3.      Fussy cut some flowers, bird and clock from sheet 002 as per the picture. Ink the edges with ground espresso.

4.      Paint the small wooden canvas block with green paint and the big one with rose. Dry brush with brown paint.

5.      Randomly paint the white picket fence with brown paint.

6.      Add the, tree, moss and mushrooms to the basket using hot glue.

7.      Make a swing with a small piece of grunge board. Wrap the fabric C46 06B around it and glue. Make 2 holes on the sides and add eyelets and chain. Hang on tree as per the picture.

8.      Paint chipboard piece 006 with white paint and leave to dry. Ink the edges with ground espresso.

9.      Arrange all the pieces and embellishments as you like or as per the picture and glue!

10.  All Done!